Western Products of Indiana  
     
 
Horse Stalls  

Western Horse Stalls are not only attractive, but tough as nails with maximum ease of assembly. The Western "Flexi-Stall" is engineered to provide the ultimate in design, flexibility and safety for your horses.

The versatility of our "Flexi-Stall" allows you to mix and match components to customize your stall to fit your specific needs. Safety has also been engineered into every stall, with no exposed edges for horses to chew, no hardware or sharp edges to rub against and no protruding objects to step on.

Western then finishes each component with an attractive black powder coating to accent the beauty of your stalls.

Horse Stalls | Sliding Door System | Horse Stall Accessories | Assembly Instructions (PDF)
 
Door and Wall Systems  

Assembly Drawing
Components are available in black, powder-coat finish, only.

Western's Stall Kits may be used in a wide range of fabricating techniques. Shown above is just one example of how to build a front wall. (Measurements may be calculated in the field.)

 
Horse Stall Kit, Accessories  
 

Front Wall System
Door dimensions are 48" wide, 86" high. Overhead clearance must be at least 94 1/2" to accommodate the door, trolley, and track.

10' Front (#80010)
12' Front (#80012)

Close-Up | View Dimensions

System comes complete with the following:
(2) Grille Sections
     10' front includes (1) 24" (80240) and (1) 48" (80480)
     12' front includes (2) 48" (80480)
(2) End channels (80045)
(4) Header Channels (80006)
(1) Wall Brace (84545)

Additional wood materials required for a 10' front wall:
(8) 2" x 6" x 6'
(1) 2" x 12" x 10' track board.

Additional wood materials required for a 12' front wall:
(9) 2" x 6" x 8'
(1) 2" x 12" x 12' track board.

 
 

Side Wall System

10' Partition (#81048)
12' Partition (#81248)

Close-Up | View Dimensions

System comes complete with the following:
(3) Grille sections
     10' front wall includes (2) 48" (80480) and (1) 24" (80240)
     12' front includes (3) 48" (80480)
(2) End channels (80045)
(2) Header Channels (80006)
(1) Wall Brace (84545)

Additional wood materials required for a 10' wall:
(11) 2" x 6" x 10' for 10'

Additional wood materials required for a 12' wall:
(11) 2" x 6" x 12' for 12'

 
 

Partition or Rear Wall System (80445)

10' or 12' Section (#80445)

Close-Up | View Dimensions

System comes complete with the following:
(4) End channels (80045)
(2) Wall Braces (84545)

Additional wood materials required:
(17) 2" x 6" equal to desired wall length

 
   

Horse Stalls | Sliding Door System | Horse Stall Accessories | Assembly Instructions (PDF)
 
     
About Western Products   Contact Us